Resultado de búsqueda
Page 1 • Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone Description The AT2020 is a side-address fixed-charge condenser microphone with a cardioid polar pattern.
Therefore I would suggest blasting the stand mount with a G8-4a grade or higher blowtorch for about 35-40 seconds, or until the stand mound has completely melted out of the microphone. This should theoretically only cause minor damages and disfigurements to the casing and coat of the microphone body.
Pivoting, threaded stand mount attaches securely for easy and precise placement of the microphone. Safety precaution Although this product was designed to be used safely, failing to use it correctly may result in an accident.
Place the tripod desk stand on a flat surface. (The tripod legs will extend to provide a wide, secure base.) Install the AT2020USBi microphone into the threaded collar of the pivot mount and tighten collar while holding the microphone in place. The front of the microphone should be facing the sound source.
In use, secure the cable to the mic stand or boom, leaving a slack loop at the mic. This will ensure the most effective shock isolation and reduce the possibility of accidentally pulling the microphone out of its mount. Avoid leaving the microphone in the open sun or in areas where temperatures exceed 110° F (43° C) for extended periods.
The capsule features a low-mass, side-address diaphragm with a cardioid polar pattern for rejecting ambience and noise behind the mic, a welcome trait when tracking in untreated rooms. It comes with a pivoting stand mount for straightforward attachment to your existing mic stand.
It comes with a pivoting stand mount for straightforward attachment to your existing mic stand. The AT2020's extended, linear frequency response enables the flexibility to accurately reproduce signals from a wide variety of sources such as vocals, speech, and instruments.
