Resultado de búsqueda
Keystone G-Series are Bottleneck Elevators. These drill pipe elevators are designed for drill pipe with an 18 deg. taper. They are available in five types, MG 100-ton, RG 150-ton, MGG 250-ton, and GG 350-ton, and HGG 500-ton. They cover pipe sizes from 2 3/8” – 5 7/8”.
El Elevador para Tubería es un tipo de transporte de tubo implementando una conexión con la tubería de perforación, la tubería y el cuello de la cubierta. Es principalmente usado en la torre de perforación para cargar y levantar tuberías de perforación, tubos y tubos de revestimiento.
Elevators for a wide range of pipe handling needs from bottle neck, slip type, square shoulder, side door, and deep water conditions.
The GG Bottle Neck Elevator is a 350 ton drill pipe elevator that is bored to fit the contour of 18 degree drill pipe. The GG Elevator is constructed in two halves of practically the same weight for better balance making them easier to latch on to and to take off of the pipe.
The MGG Bushing Style Elevator is a 250 ton bottle neck elevator that has an interchangeable bushing bored to fit the contour of 18 degree drill pipe. The elevator is constructed in two halves of practically the same weight for better balance making them easier to latch on to and take off of pipe.
Nuestro elevador de cuello de botella se realiza conforme a la norma API Spec 8C, y se prueba con 2 veces la carga máxima para asegurar que sea lo suficientemente resistente para el uso a largo plazo.
Bottleneck, G Series elevators, are used for lifting and lowering piping, casing, and tubes. They are a kind of center latch elevator. They have an 18 degree taper shoulder. Due to their design, only tubes with an 18 degree external upset should be used.
