Resultado de búsqueda
FAMECA by designing detectors that complies both with the IEC standard and comprehensive field configurations. We can now confidently confirm that, to our best knowledge, the TAG 200 is the only MV Voltage Detector to comply with BS IEC 61243-1 and as such be CE marked accordingly. Use of Voltage Detectors
Fameca TAG 200 Voltage Detector (11/33kV) is lightweight, compact & designed for all weather conditions to determine whether an overhead power line is live or dead up to 69kV, the voltage range is determined by a ratio of 1:3 (i.e. 11-33kV).
The TAG-200 and TAG-200MR Voltage Detectors are designed to provide added safety to crew members that are required to work on distribution lines. The minimum voltage setting is 4kV (2.4kV line-to-ground). The TAG-200 and TAG-200MR Detectors maximum voltage setting is 69kV (40kV line-to-ground). Operating frequency is 60Hz (optional 50Hz available).
The PENTA FAMECA MTag is Designed for «proving dead» on a high voltage distribution system between 1 kV and 69 kV (voltage ranges calibrated according to IEC recommendations). The PENTA FAMECA MTag detects any nominal voltage present on an overhead line or in a substation.
TAG 2000 Electronic Mulit-range MV DetectorCLY 300 200. Call: +44 (0) 1234 855 855 to order. The TAG 2000 device is designed to check absence or presence of nominal voltage by direct contact to the line. It is usually used prior to earthing operation of a three-phase voltage system.
Detector de tensión para terminales capacitivos 10- 30 Kv , mod TAG 200 BC FAMECA ( Francia) Aparato destinado a comprobar la ausencia de tensión en los terminales capacitivos de las bornas enchufables MAT de las instalaciones eléctricas de 10 KV a 30 KV. Autorización EDF.
Detector para verificar la ausencia de tensión nominal en un conductor (no aislado). Su uso es antes de la colocación de los equipos de puesta a tierra (5 Reglas de Oro). Gama de tensión 3 kV a 36kV.
